Setting Up The Incubator Heat Controller

1- Press Set long still
2- Press set again
3- Press F1
4- One finger press Set still and one finger press up and down arrow to limit the temperature you want.
Ok, enjoy it!

Product Description

Specification and Size:
1.Front panel size75(L)×34.5(W)mm;
2.Mounting size:71(L)×29(W)mm;
3.Product size75(L)×34.5(W)×85(D)mm;
4.sensor length2minclude the probe.
5.Measure range: -50°+99°C
6.Mounting size: 71*29mm
7.Auto switch between refrigerating and heating
8.Retrun difference value

Technical Parameters:
1. Temperature measuring range: -50°~99°C;
2. Resolution: 0.1°C;
3. Accuracy: ±1°C (-50~70°C);
4. Sensor error delay: 1 minute
5. Power supply: 110-240VAC±10%, 50/60Hz;
6. Power consumption: less than 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60°C;
10. Storage temperature: -30~75°C;
11. Relative humidity: 20%~85% (No condensate).

Related Video source: https://www.youtube.com/watch?v=TQjicdtDVrQ